Keeping a Ford in your garage may make you feel like a speed addict. Wasn’t there a speed limiter in Ford you could bypass?
The “Intelligent Speed Limiter” of Ford MyKey can be bypassed on cars already equipped with it. Once the software has started, select “Clear MyKey.” If the speed limiter is already removed, hold “Ok” until the screen says “All MyKey Cleared.”

If you know how, you can bypass Ford’s intelligent speed limiter. The speed limit can also be adjusted on Ford F250s and F150s. We’re ready to begin!
What Are Speed Limiters?
Usually located on cars, speed limiters restrict the speed of motor vehicles. 70 kph or 120 kph is the maximum speed limit.
The device is a separate device in Ford cars today, despite the fact that they come with speed limiters as standard equipment.
How speed limiters work?
Sensors monitor the speed of the vehicle when speed limiters are in place. Information detected by the engine is received by a computer.
In response to reaching a preset speed limit, the engine’s computer reduces fuel flow. A reduction in ignition does not affect the speed.
Having a speed limiter installed does not prevent you from using the accelerator. You can still use the accelerator, but your speed will not increase.
Ford cars have speed limiters
Ford’s vehicles come with conventional speed limiters and intelligent speed limiters, according to the company. The standard feature on all Ford cars is the Intelligent Speed Limiter.
Almost all countries where Ford has a road permit require speed limiters on vehicles over 3.5 GVM (Gross Vehicle Mass).
The Intelligent Speed Limiter in Ford Cars
The MyKey feature on Ford cars makes it possible to activate and deactivate intelligent speed limits.
Automatically lowering the speed limit of vehicles when activated by the Intelligent Speed Limiter. Using Traffic Sign Recognition, it determines the required limit. The speed limit is adjusted based on the road sign.
Speed Limiter Bypass for Ford
Deactivating Ford’s intelligent speed limiter with MyKey is possible. Only expert mechanics are capable of bypassing a Ford speed limiter if the maximum GVM is exceeded. The process of making this adjustment can take over an hour.
MyKey can be used to bypass restrictions as follows:
- The onboard computer will load once you start your car.
- The main menu can be reached via a steering-wheel-mounted control.
- Choose “settings.”
- Select “MyKey” from the drop-down menu.
- You can clear your key by clicking “Clear MyKey”.
- When you select “Clear MyKey,” give it a few seconds to appear and then press “OK.”.
Why Does My Ford F250 Have A Speed Limiter?

There’s a lot of technology in the Ford F250 family truck. Speed limits might be difficult to cross if you’re familiar with the Ford F250.
In addition to the standard traction mode, the vehicle is also capable of towing/hauling, eco, slippery, deep snow, and sand traction modes. Each of these modes has a speed limit.
Speed limits can be removed through a secret mode. In other words, it’s “sports mode.” However, some tricks are required to get into “sports mode.”
The following steps can be used to remove the speed limiter on a Ford F250:
- Besides the steering wheel, a controller controls drive mode.
- Put the brakes on and select traction control. It will turn off after pressing again.
- You need to press twice. Miracles have arrived for you! There is a sport mode available.
Fuel and air flow are increased in sports mode. This results in a speed increase beyond the speed limit when the accelerator is pressed.
How Do I Bypass A Ford F150’s Speed Limiter?
It is safe to drive at a maximum speed of 97 mph on Ford’s 2010 F150. The speed limit may be annoying to someone who loves speed or in emergency situations. It will be a bit more difficult to remove the speed limiter on the Ford 2010 F150 than on the F250.
The driving mood cannot be adjusted. ForScan Software, Tuner Chips, and Application Tracking Software are the only ways to disable the speed limit.
- Software for FORScan
Engine Control Modules (ECMs) can be reconfigured using FORScan Software. Using On Board Diagnosis (OBD), you can diagnose Ford trucks using the computer in a truck.
ECM speed limits can be set using FORScan. Ford 2010 F150 can be set to your preferred speed limit when the setting is complete by just pressing the accelerator.
- Chips for tuning
The factory restored settings can be modified with a few tuner chips. Ford 2010 F150 users might end up spending a few bucks for this trick, but it will assist in bypassing the speed limit. Installation of these chips is easily done by a mechanical service provider.
- Software that tracks applications
Application Tracking Software should be included in your F150. You will be able to see it on a small screen. By selecting the server option, you are now able to select the gameplay feature. You will be able to control the speed limit once you have set it.
Can the speed limiter be removed safely?

It has become increasingly difficult to meet speed limits due to stricter traffic regulations. Whenever a road permit is given, the government ensures that vehicles are equipped with speed limiters.
If you dislike speed limits, you might not want them. However, it can save your life if you have it in your vehicle.
It is important to remember that there is a reason why different road speeds are set. A speed limiter is primarily a safety feature for teenagers driving your vehicle.
Related Articles
7 Bad PCV Valve Symptoms & How To Fix
Bad O2 Sensor Symptoms & When to Replace Them
Where To Apply Dielectric Grease On Spark Plug?
What Causes Spark Plug Electrode To Bend?
Conclusions
Old and new Ford models have different ways to remove the speed limiter. Using third-party software and MyKey, we showed you how to configure Engine Control Module and work with Intelligent Speed Limiter.
We should have answered your question about bypassing Ford speed limiters. No matter how much you enjoy speeding, never compromise your safety while driving!